Quick Reference Table
License Type | Details |
|---|---|
Regulating Agency | Wyoming Department of Fire Prevention and Electrical Safety (DFPES), Electrical Board (official site) |
Main License Types | Apprentice, Journeyman, Master, Low Voltage Technician (LV-G/A/C/S/T/X/LS), Limited Technician (LM-E/S/W/L/H), Electrical Contractor, Low Voltage/Limited Electrical Contractor |
Experience Required | Journeyman: 4 years (8,000 OJT hrs) + 576 school; Technician: 2 years (4,000 hrs) in subcategory; Master: Journeyman for 4 years with OJT & schooling. Contractor: must employ Master/Technician of Record. |
Exam Required | Journeyman, Master, Technician: Yes; Contractor: No exam, see section. |
Renewal & CE | Journeyman, Master, Technician: 3 yrs; CE: 16 hrs (8 code); Contractor: annually; see detail below. |
Initial Fee | Journeyman: $100; Technician: $100; Contractor: $400; Low Voltage/Limited Contractor: $200; Apprentice: $20 (as of 2026 - verify fees) |
Renewal Fee | Journeyman/Technician: $50; Master: $100; Contractor: $400; LV/Limited Contractor: $200 (as of 2026) |
Late Fee | $50 late, 45-day grace for Journeyman, Master, Technician |
Portal/Links | Electrical Licensing Page | Public Portal (apply/renew/lookup) |
Who Needs a License in Wyoming? (electrical license requirements in Wyoming)
Anyone performing electrical work that is subject to the National Electrical Code (NEC) in Wyoming must comply with the electrical license requirements in Wyoming. This includes nearly all electrical installations or contract work in residential, commercial, or industrial settings.
Wyoming law does not set a dollar threshold for licensing. If the work involves electrical wiring, devices, or systems regulated by the NEC, a state-issued electrical license is mandatory. This covers installation, maintenance, alteration, or repair of electrical systems, whether the project is for a home, business, or industrial site. This also includes low voltage and limited scope systems for specific technologies when they fall under licensed categories.
Journeymen and technicians cannot operate independently. They must be employed by a licensed Electrical Contractor or Low Voltage/Limited Electrical Contractor. Contractors bidding or performing work must have a qualifying Master Electrician or Technician of Record on full-time staff. The law bars one qualified individual from acting as the qualifying party for more than one company. No exemptions or handyman exceptions are specified, so always confirm before proceeding with any electrical project in Wyoming.
Electrical License Types (electrical license requirements in Wyoming)
The electrical license requirements in Wyoming are organized by role, scope of work, and voltage limits. Each license type has unique privileges, experience requirements, and limitations.
Apprentice Electrician: Entry-level, must work under supervision. Progresses through stages based on on-the-job training (OJT) and classroom hours.
Journeyman Electrician: Can plan, layout, and install wiring in any residential, commercial, or industrial setting. Requires 8,000 OJT hours and 576 classroom hours, spread over at least 4 years. Only up to 75% of experience can be in one category (e.g., residential vs commercial).
Master Electrician: Highest trade license. Can supervise large projects, qualify as the Master of Record for contractors, and act as the technical supervisor. Requires journeyman status plus 4 years’ journeyman experience and required classroom hours.
Low Voltage Technician/Limited Technician: Specialize in systems under 90 volts or load-side devices in specific areas (fire alarm, sound, irrigation, HVAC, etc.). Each specialty has its own code (e.g., LV-G for general low voltage, LM-E for elevator) and 2-year/4,000-hour experience minimum.
Electrical Contractor: Required to contract or advertise for electrical work statewide. Must appoint a Master Electrician of Record as full-time technical supervisor. Cannot operate without one.
Low Voltage/Limited Electrical Contractor: Can contract only for low voltage or limited-scope projects. Must employ a Technician of Record in the relevant low voltage or limited category.
All contractor licenses require a qualified individual (Master or Technician) as responsible party for compliance and day-to-day technical oversight. You cannot lawfully operate as a contractor or independent technician without meeting the electrical license requirements in Wyoming and designating the required technical supervisor.
How to Get Licensed in Wyoming (electrical license requirements in Wyoming)
To meet the electrical license requirements in Wyoming, you must complete specific steps for your classification. Each path requires experience, documentation, and, for most levels, passing an exam.
Verify Eligibility: Confirm you have the OJT and education hours required for your license class. Use transcripts, notarized experience letters, or board/union statements as proof.
Gather Documentation: Complete the OJT Form, Work Verification Form, and any other required forms. If applying as a contractor, include Master/Technician of Record and Personnel of Applicant forms.
Apply Online: Submit your application through the Wyoming State Fire Marshal Public Portal. Upload all supporting documents and pay the application fee plus processing surcharge (minimum $1 or 2.5% for card payments).
Await Application Review: The Electrical Board reviews your materials. Processing each stage normally takes up to 5 business days.
Schedule and Take Exam: Once approved, you will be notified to schedule your exam. Take and pass the appropriate exam for journeyman, technician, or master level. There is no exam for contractor license, but you must have a qualifying individual of record.
Upload Results and Pay Initial License Fee: After passing, upload your passing score to the portal, then pay the license fee and any surcharges.
Receive License: Once confirmed, you will receive your official Wyoming electrical license by email. Now you may legally work or contract under the electrical license requirements in Wyoming.
Online vs Mail Processing
Processing for all electrical license requirements in Wyoming now takes place mainly online. You should expect up to five business days per step. Mailed applications or paper checks are not referenced, and no background check or fingerprinting is noted in the regulations.
Form Details
You need to use official DFPES forms: OJT, Work Verification, Master of Record, Personnel of Applicant, and category-specific technician forms. Download these forms from the DFPES Electrical Licensing page.
Application Requirements (electrical license requirements in Wyoming)
Application requirements vary by license class but follow the electrical license requirements in Wyoming set by the Electrical Board.
Experience and Age Documentation
You must document required on-the-job training and classroom hours. Acceptable documentation includes: certified transcripts, union letters, notarized letters from licensed supervisors, or official work verification forms. There are no stated minimum age, residency, or citizenship requirements for any license based on DFPES guidance. However, all documents must be in good order, legible, and verified as requested by the board.
Bond and Insurance Requirements
No bond or insurance requirements are listed for any electrical license type according to DFPES as of 2026. If commercial contracts or local rules require insurance or bonding, those are managed separately. Always confirm with the DFPES for any updates: Wyoming Electrical Licensing page.
Background Check and Federal Certifications
The electrical license requirements in Wyoming do not specify a background check, fingerprinting step, or EPA/federal certification for electrical or contractor licenses. If your project scope triggers other regulatory requirements, such as hazardous system work, check with DFPES or the project owner.
Exams (electrical license requirements in Wyoming)
Most Wyoming electrical license requirements include a board-administered licensing examination. Contractor applicants do not take an exam, but journeymen, masters, and technicians must pass tests for their level or specialty.
Journeyman Exam: Application is approved by the Chief Electrical Inspector. Exam specifics (provider, format, score) are not described on the official page. The test is typically on the National Electrical Code and Wyoming rules. No passing score or retake policy is published in board rules. Check for test updates on the DFPES Licensing page.
Technician (Low Voltage/Limited) Exams: Technician-level licenses require passing a dedicated board exam. Categories include LV-G (General Low Voltage), LV-A (Alarm), LV-C (Communications), and others. You can only qualify through examination for these classifications.
Master Exam: Not explicitly detailed, but applicant must hold Wyoming journeyman status for 4 years. The master exam process is handled directly with the board.
Contractor Licenses: No examination for the contractor entity, but the contractor must name a qualifying Master Electrician or Technician who holds an active Wyoming license of the relevant class.
You will receive notification via the portal when eligible to test. Exam dates, locations, and policies are coordinated through the DFPES office after application approval. If you fail an exam or let your license lapse beyond the grace period, you must reapply and retake the test. Always verify current exam info on the official site.
Fees (electrical license requirements in Wyoming)
Meeting the electrical license requirements in Wyoming involves paying all required fees for your license type. Below are the official fees as of 2026, sourced directly from the DFPES Electrical Licensing site. All credit/debit transactions incur a 2.5% surcharge or a $1 minimum processing fee, effective April 1, 2025. You must confirm current fees before applying or renewing: Wyoming fee schedule.
Apprentice Electrician (new or renewal): $20; reinstatement after more than 1 year expired: $40 (as of 2026)
Journeyman Electrician (initial): $100; renewal: $50; late renewal: $50 (as of 2026)
Technician (initial): $100; renewal: $50; late renewal: $50 (as of 2026)
Master Electrician (renewal): $100; late fee: $50; grace period 45 days; after August 15, re-exam required (as of 2026)
Electrical Contractor (new or renewal): $400 (as of 2026)
Low Voltage or Limited Electrical Contractor (new or renewal): $200 (as of 2026)
Credit/debit processing surcharge: 2.5% (min $1), effective April 1, 2025
No bond requirements confirmed (as of 2026, verify at Wyoming DFPES)
Renewal and Continuing Education (electrical license requirements in Wyoming)
The electrical license requirements in Wyoming set fixed renewal cycles, fees, grace periods, and mandatory continuing education (CE) hours.
Renewal Deadlines, Cycles, and Grace Periods
Journeyman: Renews every 3 years on January 1. Renewal opens October 1 the previous year. $50 fee. If missed, a $50 late fee applies during a 45-day grace period. Past grace, you must re-exam and pay initial fees.
Technician: Renews every 3 years on July 1. Renewal opens April 1. Same $50 renewal, $50 late, and 45-day grace structure.
Master Electrician: Renewal period and deadline not fully specified, but $100 renewal fee and 45-day grace period apply. After August 15, must re-exam; if reciprocated, cannot use reciprocity a second time.
Electrical Contractor / Low Voltage or Limited Contractor: Renewal is annual, due July 1 after issuance. Contractor must submit all required acknowledgment forms each renewal. Late renewal is subject to reinstatement requirements per board rules.
Apprentice: $20 renewal, $40 if more than 1 year expired. No continuing education listed.
Continuing Education (CE) Requirements
Journeyman and Master: 16 hours CE every 3 years, at least 8 must cover code updates (e.g., NEC). You must complete CE before renewal, and the board can audit and reject non-compliant hours. If you renew in a code update year, 8 hours must directly address NEC code changes.
Technician and Contractor CE: Not explicitly stated. Verify at the official DFPES licensing page.
Approved CE Providers: Not detailed in rules. Ensure that your CE is accepted by the Board by checking with DFPES before enrolling.
Consequences for Lapsed or Expired Licenses
If your journeyman, master, or technician license lapses beyond the 45-day grace period, you must re-exam and pay initial license fees again. A reciprocated license cannot use reciprocity a second time if it lapses past renewal deadlines. For contractor licenses, penalties and late renewals are handled per Wyoming board rule.
Reciprocity (electrical license requirements in Wyoming)
Wyoming does offer reciprocity for journeyman and master electrical licenses under strict conditions, in order to maintain integrity of the electrical license requirements in Wyoming. You may reciprocate your license one time only from another state with a formal reciprocal agreement in place.
Your original license state must have required an exam, 70% minimum for journeyman, 75% for master, proof of at least 1 year in good standing.
You must meet Wyoming’s experience and CE requirements for your license class (16 hours, 8 in code, completed within 3 years).
Submit application through the Public Portal, providing your out-of-state license, CE transcripts, test score details, and any required verification (via NERA or other board-endorsed method).
Reciprocity may only be used once. If you let a reciprocated license lapse, you lose eligibility for future reciprocation and must fully reapply and test in Wyoming.
There is no published list of reciprocal states. You must contact DFPES or use their application portal to determine if your license qualifies. Note that Wyoming reserves the right to deny reciprocity if your existing license does not meet its experience, testing, and CE standards.
Official Links
Wyoming Electrical Work Scope Rules
Wyoming Electrical Statutes (Title 35)
